搜索
img

Recommended Products

  • AEG AC Metal Enclosed Switchgear

    SecoGear series P/V-12 AC metal-enclosed switchgear is suitable for three-phase indoor AC power distribution systems with a nominal system voltage of 3.6~12kV. It meets the most stringent standards in terms of safety and reliability. This series of products can provide extremely cost-effective solutions for public power distribution, industry and buildings.

  • XM Distribution box

    The XM type distribution box is suitable for single-phase, three-wire or three-phase five-wire terminal circuits with a rated voltage of 220 or 380V and a single-row load total current not greater than 80A. The overload, short circuit, leakage, and over-voltage protection of the device are used by non-professionals and do not require maintenance. The bottom box of the distribution box is made of high-quality cold-rolled steel plate, and the surface is sprayed with plastic, which has the characteristics of non-deformation, non-oxidation, and corrosion resistance.

  • XL-21 Power cabinet

    XL-21 low-voltage power distribution box is suitable for power distribution in power plants and industrial and mining enterprises, in three-phase four-wire or three-phase five-wire systems with a voltage of 500 volts and below. The XL-21 low-voltage power distribution box is an indoor device installed against the wall, and the screen is overhauled. The shell is made of steel plate. The knife switch operating handle is located on the upper right column of the box. It can be used as a power switch. According to user needs, different types of circuit breakers with different current levels can be selected to meet the needs of different users.

  • KYN28A-12 Type middle-mounted armored metal-enclosed high-voltage switchgear

    KYN28A-12 type removable AC metal-enclosed switchgear is a new product designed and developed by our company on the basis of absorbing advanced manufacturing technology at home and abroad. It is suitable for three-phase rated voltage 3-12KV, 50HZ, and rated current 630-3150A. The AC system is used for power transmission in power plants, power systems and industrial and mining enterprise substations for receiving and distributing power, achieving control, protection, and detection purposes. It can also be used to frequently start high-voltage motors to meet the "five prevention" chain requirements. The switchgear can be equipped with ABB’s VD4 vacuum circuit breaker, and can also be equipped with domestic VSI vacuum circuit breakers. It is a power distribution device with superior performance. It has flexible scheme combination, compact structure, safe and reliable, convenient maintenance and resistance. Advantages such as impact and corrosion resistance.

  • SRC-12 type inflatable ring network switch cabinet

    The self-developed SRC-12 type inflatable SF6 metal-enclosed gold-insulated ring network switchgear is widely used in 10KV/6KV power distribution systems, and is the first choice for all types of urban and rural user power distribution systems.

  • HXGN15-12 closed ring network switch equipment

    XGN15-12 series high-voltage ring network cabinet is a combined metal-enclosed 10KV switchgear. With its excellent performance, as the high-voltage equipment of the secondary substation and distribution room, it is widely used in various substations, switching stations, and cabinets. Type substation. Its various performance indicators meet or exceed similar domestic products, and are high-voltage products that have been used on a large scale in the power system in recent years and are prioritized for promotion. It has fully replaced similar imported products.

  • DFW-12 type cable distribution box

    DFW-12 type 10KV outdoor cable distribution box. It is widely used in the relay and power distribution of 10KV power system. It is an important electrical equipment for the collection and tapping of outdoor cables. The branch box is divided into ordinary cable branch box and cable branch box with switch. It can also be divided into ordinary type and flood control type according to the sealing level. It is widely used in cities and areas where industrial and mining enterprises are concentrated. It is the first choice for realizing urban power grid cable transformation. Realizing ring network power supply.

  • RZK Low Voltage IoT Smart Switchgear

    Low-voltage IoT intelligent switch cabinet industrial control integrated machine monitoring device, through the Wifi wireless network to connect to the network Yunpinghe to monitor the parameters of the power supply in real time, analyze and process the data, generate various alarm information and alarm records, and communicate through wireless Upload the data to the automation system and data center to realize remote monitoring and management.

  • AEG Low Voltage Switchgear MLS

    MLS type low-voltage switchgear is a low-voltage switchgear assembled by factory (FBA) using standard modules. It is suitable for power supply and distribution systems with AC 60 (50) Hz, rated working voltage ≤ 690V, and rated working current of 6300A and below. Used for electric energy distribution, conversion, control and reactive power compensation. The product complies with GB/T7251.12, JB/T9661 standard.

  • JJ1 type auto-decompression start control cabinet

    JJ1 series auto-decompression starting control cabinet is suitable for AC 50Hz, rated voltage 380V, power 11kW~400kW three-phase squirrel-cage induction motors for infrequent step-down starting, using the characteristics of autotransformer step-down to reduce the starting current, In order to reduce the impact on the transmission network when the motor starts.

  • xEnergy Eaton low-voltage switchgear

    xEnergy is a low-voltage power distribution cabinet developed by EATON to cater to the market, which can not only meet the higher and higher technical and safety requirements, but also reduce the cost.

  • GCK low voltage drawer switch cabinet

    GCK series switchgear is suitable for industrial and mining enterprises. Three-phase AC frequency 50Hz, rated voltage 380V to 600V. The primary power distribution of the power system and the secondary power distribution or control equipment with asynchronous motors as the main control object; also suitable for stations and docks , High-rise buildings, especially suitable for motor group control systems and field control devices of power plants, substations, petroleum, chemical, metallurgy, machinery, and light industry production lines. If equipped with appropriate interfaces, they can also be connected with PC (program controller) or micro The processor forms an automatic control system for power supply and distribution.

  • MNS low-voltage withdrawable switchgear

    The low-voltage withdrawable switchgear is suitable for power plants, substations, petrochemicals, metallurgical steel rolling, light industry and textiles and other factories and mining enterprises, residential communities, high-rise buildings and other places. It is used as a power system with AC 50-60Hz and rated working voltage of AC 660V and below Used for power conversion, distribution and control of power distribution equipment.

  • GGD low voltage fixed switch cabinet

    GGD type AC low-voltage power distribution cabinet is suitable for power users such as power plants, substations, industrial and mining enterprises as power distribution systems with AC 50HZ, rated working voltage 380V, and rated working current 3150A as power. Electric energy conversion, distribution and distribution of lighting and power distribution equipment For control purposes. The GGD cabinet adopts the form of a general cabinet. The product has high breaking capacity, good dynamic and thermal stability, flexible electrical scheme, convenient combination, series and strong practicability. Features such as novel structure and high level of protection not only shorten the production cycle, improve efficiency, but also save social resources. It can be used as a replacement product for low-voltage switchgear.

  • GCS low voltage withdrawable switch cabinet

    GCS AC low-voltage withdrawable switch is suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textile, high-rise buildings and other industries. In large power plants, petrochemical systems and other places with a high degree of automation. It is required to interface with computers. As a three-phase AC frequency of 50 (60) Hz, a rated working voltage of 660V and below, and a ramp current of 4000A and below Low-voltage complete set of power distribution equipment used in the system for power distribution, centralized motor control, and reactive power compensation.

  • YBM-12 high-voltage/low-voltage prefabricated substation

    YBM-12 type high-voltage/low-voltage prefabricated substation is used in 10kV ring network power supply, dual power supply or terminal power supply system, as a complete set of equipment for substation, distribution metering, compensation, control and protection. Except for transformers installed in the substation, the high-voltage side is not equipped with four-position (or two-position) load switches, backup protection fuses and plug-in fuses; the low-voltage side can be equipped with control appliances, power distribution appliances, and compensation according to user requirements Devices and meters, etc. Use transformer oil as insulation and arc extinguishing medium.

  • XLW-1 electric (dynamic) power distribution box

    The XLW-21 AC low-voltage power distribution box is an outdoor device. There is a waterproof cover on the top of the box, and there is a gap between the top cover and the box body to facilitate heat dissipation and moisture. The cabinet is divided into an inner door and an outer door. The outer door is surrounded by waterproof rubber strips and waterproof grooves. The inner door can be equipped with meters, lights, buttons, and changeover switches. The cabinet is divided into two types: floor type and hanging type. The bottom of the box has cable inlet and outlet holes.

  • JJ1 type auto-decompression start control cabinet

    GCS (BFC) type low-voltage withdrawable switchgear is suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textile, high-rise buildings and other industries. Used as a three-phase AC frequency of 50 (60) HZ, rated working voltage of 380V (440V), (660V), and rated current of 6300A and below in power distribution, motor centralized control, and reactive power compensation The low-voltage complete set of power distribution device adopts standard modular design. Each functional unit is relatively independent. The outlet unit can be installed up to 22 channels. The mechanism adopts a screw propulsion mechanism, which is stable and lifeable, ensuring that the same unit can be interchanged and improving power supply reliability!

  • CCX-1A dense insulated bus duct

    CCX-1A densely insulated busway is developed by our company based on traditional dense busway through process improvement. The busbar conductor is made of electrolytic copper containing more than 99.99% copper. After high-quality processing, it is outsourced with special high-strength insulating materials. Makes the conductive copper bars have excellent insulation performance. The phases and the external charging are tightly attached together, which can quickly dissipate the heat generated by the copper bar to the outside, effectively reducing the temperature rise of the busway and increasing the current carrying capacity of the bus. At the same time, the bus has small size, stable mechanical and electrical performance, and can withstand greater electrical stress and thermal stress. The protection grade is IP4, IP54. The bus has many functional units and flexible installation and configuration. It can meet the power transmission and distribution requirements of various industrial and mining, enterprises and institutions, high-rise buildings, and workshops.

  • CCX-2A dense insulated bus duct

    This bus bar is cast by our company based on market demand, using advanced raw materials and technology. The interphase is poured with international advanced insulation materials, which avoids the damage to the insulation during the traditional assembly process, further improves the insulation reliability of the product, prolongs the service life of the bus bar, and has anti-corrosion and fire-resistant properties, and the appearance is more beautiful. The protection level reaches IP68. The CCX-2A busway system is suitable for the transmission and distribution power supply systems of various large industrial plants, office, commercial and residential buildings, large shopping malls, airports, stations, stadiums, exhibition halls, and chemical, metallurgical and other places.

  • CMC-2B air insulated bus duct

    CMC-2B air-insulated bus duct is made by improved processing on the basis of air-type bus duct. The busbar conductor is made of electrolytic copper with a copper content of more than 99,99%. After high-quality processing, the outer surface is wound with a polyester insulating film, and then shrinked with a PVC heat-shrinkable tube, which significantly enhances the insulation performance of the copper busbar. The phases and shells are separated by flame-retardant insulating blocks, and then assembled in a closed and well-grounded metal shell, the electrical and mechanical properties are very stable. The shell is processed and formed by high-quality cold-rolled plates, and the surface is treated with electrostatic spray, which greatly improves the corrosion resistance.

  • CMC-3B Air insulated bus duct

    CMC-3B high-protection air-insulated busway is a new product specially developed by our company using advanced technology at home and abroad to meet the demand for high protection capabilities of modern power transmission and transformation systems. The product has been tested by relevant national departments, and all technical indicators are at the leading level.

  • CMC-FH fireproof bus duct

    CMC-FH is a kind of busbar of power transmission and distribution thousand-wire system specially developed by our company for fire protection and places with higher fire protection requirements. It is suitable for three-phase four-wire or three-phase five-wire power supply and distribution system with system 50-60HZ, voltage 660V and below, and rated current 250A-3150A.

  • Bridge

    The bridge is a bracket for supporting and laying cables. Cable trays are commonly used in engineering. Cable trays are used as a supporting project for wiring projects. There is currently no specific specification guidance. The specifications and programs of various manufacturers lack universality. Therefore, the design and selection The process should be based on the type and quantity of the weak current system lines, a reasonable selection of the applicable bridge.

  • Charging pile

    The AC charger system is an AC power supply device for electric vehicles with complete protection functions and human-computer interaction functions. It is simple to operate and suitable for installation in indoor and outdoor electric vehicle charging stations, public parking lots, residential district parking lots, large commercial building parking and roads. Side parking spaces and other places.

  • HXGN18一12型充气式环网开关柜

    深圳市蓉电实业有限公司自主研发生产的HXGN18-12型充气式 SF6金属封闭金绝缘系列环网开关柜.广泛用于10KV/6KV配电系统.是城乡各类用户变配电系统的首选开关产品。 开关柜为模块化单元模式.可根据不同用途进行组合;由固定式单元组合与可扩展型单元两大类,满足各种变电站对紧凑型开关柜灵活使用的需要。 HXGN18-12型充气式开关柜是一个完全密封的系统.其所有带电部件以及开关封闭在不锈钢的充体内。整个开关装皿不受外部环境条件的影响.从而可以确保运行可靠性及人身安全,并且实现了免维护。通过选择可扩展母线,可以实现任何组合.达到全模块化。扩展母线完全绝缘和屏蔽,确保了高可靠性和安全性。 HXGN18-12型充气式开关柜同时可以提供工厂化的自动化解决方案.形成了智能化开关的概念.并将现场安装及调试工作量降到了最低。 HXGN18-12型开关柜分为非扩展标准配置和可扩展标准配置。由干具有全模块和半模块的组合性以及自身的可扩展性,因而具有极其特殊的灵活性。 HXGN18-12型充气式开关执行GB标准。在室内条件下(20°C)运行的设计寿命超过30年。

  • XLW-1电(动)力配电箱

    本箱为户外装置。箱顶有防水盖,顶盖于箱体之间留有空除,便于散热和水分。箱体分内门、外门,外门周边加防水胶条和防水槽,内门可装仪表、灯、按钮和转换开关等。箱体分落地和悬挂式两种,箱底部开电缆进出线孔。

  • JJ1型自耦减压启动控制柜

    GCS(BFC)型低压抽出式开关柜适用于发电厂、石油、化工、冶金、纺织、高层建筑等行业的配电系统。作为三相交流频率为 50 (60) HZ,额定工作电压为380V (440V )、( 660V),额定电流为6300A及以下的发、供电系统中的配电、电动机集中控制、无功功率补偿使用的低压成套配电装置,该装置采用标准模数化设计,各个功能单元相对独立,出线单元最多可装22路,机构采用丝杠推进机构,平稳可命,确保相同单元可互换,提高供电可靠性!

  • HXGN18一12型充气式环网开关柜

    深圳市蓉电实业有限公司自主研发生产的HXGN18-12型充气式 SF6金属封闭金绝缘系列环网开关柜.广泛用于10KV/6KV配电系统.是城乡各类用户变配电系统的首选开关产品。 开关柜为模块化单元模式.可根据不同用途进行组合;由固定式单元组合与可扩展型单元两大类,满足各种变电站对紧凑型开关柜灵活使用的需要。 HXGN18-12型充气式开关柜是一个完全密封的系统.其所有带电部件以及开关封闭在不锈钢的充体内。整个开关装皿不受外部环境条件的影响.从而可以确保运行可靠性及人身安全,并且实现了免维护。通过选择可扩展母线,可以实现任何组合.达到全模块化。扩展母线完全绝缘和屏蔽,确保了高可靠性和安全性。 HXGN18-12型充气式开关柜同时可以提供工厂化的自动化解决方案.形成了智能化开关的概念.并将现场安装及调试工作量降到了最低。 HXGN18-12型开关柜分为非扩展标准配置和可扩展标准配置。由干具有全模块和半模块的组合性以及自身的可扩展性,因而具有极其特殊的灵活性。 HXGN18-12型充气式开关执行GB标准。在室内条件下(20°C)运行的设计寿命超过30年。

  • GCS型低压抽出式开关柜

    GCS型低压抽出式开关柜(以下简称装置)是两部联合设计组根据行业主管部门、广大电力用户及设计单位的要求设计研制出的符合国情、具有较高技术性能指标、能够适应电力市场发展需要并可与现有引进产品竞争的低压抽出式开关柜。该装置目前已被电力用户广泛选用。装置适用于发电厂、石油、化工、冶金、纺织、高层建筑等行业的配电系统。在大型发电厂、石化系统等自动化程度高.要求与计算机接口的场所.作为三相交流频率为50(60)Hz,额定工作电压为660V及以下,倾定电流为4000A及以下的发、供电系统中的配电、电动机集中控制、无功功率补偿使用的低压成套配电装置。装置的设计符合下列标准IEC439-1《低压成套开关设备和控制设备》GB7251.1一1997(低压成套开关设备和控制设备) .结构特点.装置的主构架采用8MF型钢,构架采用拼装和部分焊接两种结构形式。主构架上均有安装模数孔E=20mm。.装置各功能室严格分开,其隔室主要分为功能单元室、母线室、电缆室.各单元的功能相对独立。.装置柜体的尺寸系列如表4。

  • XLW-1电(动)力配电箱

    本箱为户外装置。箱顶有防水盖,顶盖于箱体之间留有空除,便于散热和水分。箱体分内门、外门,外门周边加防水胶条和防水槽,内门可装仪表、灯、按钮和转换开关等。箱体分落地和悬挂式两种,箱底部开电缆进出线孔。

  • JJ1型自耦减压启动控制柜

    GCS(BFC)型低压抽出式开关柜适用于发电厂、石油、化工、冶金、纺织、高层建筑等行业的配电系统。作为三相交流频率为 50 (60) HZ,额定工作电压为380V (440V )、( 660V),额定电流为6300A及以下的发、供电系统中的配电、电动机集中控制、无功功率补偿使用的低压成套配电装置,该装置采用标准模数化设计,各个功能单元相对独立,出线单元最多可装22路,机构采用丝杠推进机构,平稳可命,确保相同单元可互换,提高供电可靠性!

  • HXGN18一12型充气式环网开关柜

    深圳市蓉电实业有限公司自主研发生产的HXGN18-12型充气式 SF6金属封闭金绝缘系列环网开关柜.广泛用于10KV/6KV配电系统.是城乡各类用户变配电系统的首选开关产品。 开关柜为模块化单元模式.可根据不同用途进行组合;由固定式单元组合与可扩展型单元两大类,满足各种变电站对紧凑型开关柜灵活使用的需要。 HXGN18-12型充气式开关柜是一个完全密封的系统.其所有带电部件以及开关封闭在不锈钢的充体内。整个开关装皿不受外部环境条件的影响.从而可以确保运行可靠性及人身安全,并且实现了免维护。通过选择可扩展母线,可以实现任何组合.达到全模块化。扩展母线完全绝缘和屏蔽,确保了高可靠性和安全性。 HXGN18-12型充气式开关柜同时可以提供工厂化的自动化解决方案.形成了智能化开关的概念.并将现场安装及调试工作量降到了最低。 HXGN18-12型开关柜分为非扩展标准配置和可扩展标准配置。由干具有全模块和半模块的组合性以及自身的可扩展性,因而具有极其特殊的灵活性。 HXGN18-12型充气式开关执行GB标准。在室内条件下(20°C)运行的设计寿命超过30年。

Into Shenrong Electric

ABOUT SHENRONG

Shenzhen Rongdian Industrial Co., Ltd. has advanced processing equipment, complete, high-precision testing equipment, sophisticated technical team, skilled production staff, forming a strong machining, spraying, assembly, wiring and other production capabilities. The company is a power distribution equipment manufacturer integrating R&D, manufacturing, and sales. It gradually improves the corporate management system, improves the level of international management, and uses international technical standards for production to ensure zero-defect product quality.

  • img
    1995

    Founded in 1995

  • img
    13800

    Registered capital of 138 million

  • img
    14000

    The plant area is more than 14,000 square meters

电话

Hotline

17722472125

Email:rongdian_2008@163.com
Add:3rd Floor, Building 3, No.42 Yanchun Road, Tongxin Community, Baolong Street, Longgang District, Shenzhen, China

About us

公众号二维码

Scan it

公众号二维码

Follow me

Copyright © 2021 Shenzhen Rongdian Industrial Co., Ltd.  粤ICP备14007671号     Power by:300.cn  

Copyright © 2021 Shenzhen Rongdian Industrial Co., Ltd  粤ICP备14007671号      Power by:  300.cn